ar6430s572003ca

Partially weld in bottom corner pillar reinforcement

Type ar · topic 64.30 · version 0101 · 2015-06-15

Applies to: Model 415.605/705

Where it sits

Function group 3 Body › 64 Rear wall and rear end › 64.30 Corner paneling — Series 415 (models 605, 705)

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 415 (models 605, 705)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 415 (models 605, 705)

AR64.30-S-5720-03CA

Partially weld in bottom corner pillar reinforcement

Model

415.605/705

Partially weld in bottom corner pillar reinforcement

S64.30-4566-09

1

Install bottom corner pillar paneling (1) and side crossmember (2), fit and fix in place.

2

Bottom corner pillar paneling (1) (areas A, B and C).

3

Bottom corner pillar paneling (1) (area D).

Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion.

4

Grind inert gas welds and inert gas spot welds down flat (areas A to D).

Partially weld in bottom corner pillar reinforcement

S64.30-4567-09

5

Side crossmember (2) (areas E to H).

6

Bottom corner pillar paneling (1) and side crossmember (2) (areas I, J and K).

7

Side crossmember (2) (area L).

8

Clean weld joints.

9

Remove shavings.