ar6430s572002e

Prepare bottom corner pillar reinforcement section

Type ar · topic 64.30 · version 0102 · 2016-06-03

Applies to: Model 447, 448

Where it sits

Function group 3 Body › 64 Rear wall and rear end › 64.30 Corner paneling — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 447 · Series 448

AR64.30-S-5720-02E

Prepare bottom corner pillar reinforcement section

Model

447, 448

Prepare bottom corner pillar reinforcement section

S64.30-4712-09

a

Dimension approx. 15 mm

1

Mark separating points bottom corner pillar reinforcement (1) and cut (area A, A1 and A2).

Transfer separating point from vehicle (area A), mark crimping flange approx. 15 mm (area B).

2

Crimp bottom corner pillar reinforcement (1) (area C).

3

Grind mating surfaces on bottom corner pillar paneling (1) down to bare metal in crosshatched areas.

Sand down spot weld flanges to bare metal on both sides.

4

Remove shavings.

5

Coat insides of spot weld flanges with zinc dust paint.