ar6430s572001e

Partially separate corner pillar reinforcement at bottom

Type ar · topic 64.30 · version 0102 · 2016-06-03

Applies to: Model 447, 448

Where it sits

Function group 3 Body › 64 Rear wall and rear end › 64.30 Corner paneling — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 447 · Series 448

AR64.30-S-5720-01E

Partially separate corner pillar reinforcement at bottom

Model

447, 448

Partially separate corner pillar reinforcement at bottom

S64.30-4710-09

a

Dimension approx.70 mm

1

Mark cut at bottom corner pillar paneling (1) and cut (area A).

Do not cut too deeply.
Otherwise the components below can be damaged and weakened.

2

Expose spot welds on bottom corner pillar reinforcement (1) and cut out (areas B to D).

3

Remove damaged bottom corner pillar reinforcement (1).

Partially separate corner pillar reinforcement at bottom

S64.30-4711-09

4

Drill holes for MAG welding (area E).

5

Grind mating surfaces down to bare metal in crosshatched areas and around the holes (area E).

Sand down spot weld flanges to bare metal on both sides.

6

Remove shavings and drill chips.

7

Coat insides of spot weld flanges with zinc dust paint.