ar6420d573104f

Sealing left and right hollow cavities in end plate with assembly foam

Type ar · topic 64.20 · version 0100 · 2013-05-27

Applies to: MODEL 909

Where it sits

Function group 3 Body › 64 Rear wall and rear end › 64.20 Rear end — Series 909

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 909

AR64.20-D-5731-04F

Sealing left and right hollow cavities in end plate with assembly foam

MODEL

909

Repair materials

Number

Designation

Order number

BR00.45-Z-1032-01A

Installation foam, e.g.: Ceresit TS31 500 ml

Freely available
(Manufacturer Henkel)

Sealing left and right hollow cavities in end plate with assembly foam

1

Apply installation foam through each second opening (B) on right and left in end plate (1) in front of seal plates (4) (arrows).


Screw bolt into thread in towing hook mount on right side.
Otherwise the thread in the towing hook mount can stick.


Seal plates (4) are not included in the scope of supply of the end plate (1). For this purpose foam area between openings A and B completely.



2

Allow installation foam to cure according to description and remove excessive material.


D64.20-0006-04