Remove/install rear wall paneling

AR64.10-W-1100E

Remove/install rear wall paneling

09.03.2020

Model

963, 964

1

Rear wall paneling

 Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

 Danger

Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents

Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.

AS97.00-Z-0001-01A

 Danger

Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors.

No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated.

AS98.00-Z-0002-01A

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on paintwork repairs

AH98.00-P-9408-02A

Topical note

Notes on cavity preservation

AH97.20-P-0001-01B

Topical note

General information on body repair

AH60.00-N-0001-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

General notes on welding

AH60.00-N-0005-01A



Remove

1

Remove detachable parts in area to be repaired

2

Cover all detachable parts remaining in vehicle with welding protection blankets

 Commercially available devices/tools
Weld protection blanket

3

Remove rear wall paneling (1)

AR64.10-W-1100-01E

 Commercially available devices/tools
Rotary wire brush
Spot weld milling machine
Wet and dry vacuum cleaner

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

4

Prepare rear wall paneling (1) for installation

AR64.10-W-1100-03E

 Commercially available devices/tools
Rotary wire brush

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A



Install

5

Install rear wall paneling (1)

AR64.10-W-1100-04E

 Commercially available devices/tools
Rotary wire brush
Clamping pliers (Standard)
Multifunction unit (spot welding)
MIG-MAG inert gas welder (steel, brazing, aluminum)
Wet and dry vacuum cleaner

6

Remove welding protection blankets

7

Prime repair area with primer filler

 Use only paints approved by Daimler AG.

8

Supplement seals with body sealant in repair area

White sealing compound, 310 ml, DBL 6069.20

*BR00.45-Z-1003-01A

9

Paint repair area adjacent surfaces

 Use only paints approved by Daimler AG.

10

Add cavity preserving agent

Cavity preservation (free of solvents), 1 liter

*BR00.45-Z-1003-05A

11

Install detachable parts in area to be repaired



000 588 01 72 00 Sealing and corrosion protection gun

WS97.00-N-0002B

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

BR00.45-Z-1003-01A

White sealing compound, 310 ml, DBL 6069.20

A 001 989 63 20

BR00.45-Z-1003-05A

Cavity preservation (free of solvents), 1 liter

A 000 986 72 70 10