D64.10-1255-06
1 Remove remaining adhesive material from floor panel (1) and protruding retaining profile (2)
Do not leave more than 0.2 mm of old adhesive.
D64.10-1256-06
2 Cut new retaining profile (6) to size and fit.
3 If applicable, drill rivet hole (4) into new retaining profile (6).
4 Drill bolt hole (3) through floor panel (1) and new retaining profile (6) as shown.
Dimension:
a = 25 mm
5 Clean bonding area on floor panel (1), new retaining profile (6) as well as protruding retaining profiles and apply primer.
6 Apply sealing adhesive (5).