ar6350p146002e

Preparing new rear fender front section

Type ar · topic 63.50 · version 0108 · 2006-07-26

Applies to: MODEL 202.0 /1

Where it sits

Function group 3 Body › 63 Side wall › 63.50 Rear fenders — Series 202 (models 0**, 1**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 202 (models 0**, 1**)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.31 Rear fender — Series 202 (models 0**, 1**)

AR63.50-P-1460-02E

Preparing new rear fender front section

Commercially available tools

Number

Designation

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1029-04A

Honing brush (grain 120)

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1002-03A

Straight grinder (electric/pneumatic)

Preparing new rear fender front section
Preparing new rear fender front section

P63.50-0212-01

P63.50-0211-01

1 Drill holes in new part with 7 mm dia. bit (areas A and B, arrows).

Preparing new rear fender front section
Preparing new rear fender front section

P63.50-0214-01

P63.50-0213-01

2 Grind connection surfaces on new part down to bare metal (shaded areas).

3 Grind spot welding flanges down to bare metal on both sides.

4 Coat insides of spot welding flanges with zinc dust paint.