ar6350p140102rg

Prepare complete rear fender for installation

Type ar · topic 63.50 · version 0100 · 2017-05-03

Applies to: Model 190.4

Where it sits

Function group 3 Body › 63 Side wall › 63.50 Rear fenders — Series 190 (models 4**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 190 (models 4**)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.31 Rear fender — Series 190 (models 4**)

AR63.50-P-1401-02RG

Prepare complete rear fender for installation

Model

190.4

The following steps are shown on the new part on the left side of the vehicle and must be performed analogously on the right side in the event of damage.

Prepare complete rear fender for installation

1

Grind mating surfaces on rear fender (1) down to bare metal in the cross-hatched areas for adhesively bonded connections/weld joints.


Observe pretreatment of bonding surfaces.
Prepare welds by grind down to bare metal with stainless steel brush.



2

Remove shavings using wet/dry vacuum cleaner.


P63.50-4229-05