AR63.50-P-1400-04GY | Install rear fender | ||
| Measures for preventing damage to vehicles or components when performing electric welding work | All models |
Commercially available tools
Number | Designation | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1038-02A | Manual temporary fastener, dia.6.4 mm - clamping range 0 -15 mm, identification color silver Firma Hausmann GmbH D-34346 Hann. Münden, Germany | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1023-04A | Abrasive disk, dia. 50 mm, 80 m/s (max. 23,000 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1003-14A | Blind rivet tool |
P63.50-2862-09
1 Fit rear fender and fasten using clamping pliers.
2 Mark holes for riveted joint in area K and drill.
3 Remove rear fender and deburr holes for riveted joint.
4 Fit rear fender and fasten using manual temporary fastener .
5 Rear fender in areas D, E, G, H, I and J .
6 Rear fender in areas F, EA and HA .
7 Rivet rear fender In area K.
8 Rear fender in areas A, B and C .
9 Grind down flat seam welds and plug welds.
10 Clean welds.
11 Fill rear fender in cross-hatched areas with body solder and smooth.
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work