ar6350p140003y

Prepare new rear fender

Type ar · topic 63.50 · version 0101 · 2006-10-31

Applies to: MODEL 219

Where it sits

Function group 3 Body › 63 Side wall › 63.50 Rear fenders — Series 219

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 219

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.31 Rear fender — Series 219

AR63.50-P-1400-03Y

Prepare new rear fender

Prepare new rear fender

Set of cutting templates

219 589 01 23 00

Commercially available tools

Number

Designation

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Prepare new rear fender

P63.50-3079-09

1 Mark cutting line on new rear fender (1) with cutting template (area A1).

2 Cut new rear fender (1) on cutting line with body saw
(area A1).

Prepare new rear fender

P63.50-3035-09

3 Grind connection surfaces down to bare metal on new rear fender (1) in shaded areas with round wire brush.

Sand the spot weld flanges on both sides down to bare metal.

Prepare new rear fender

P63.50-3039-06

4 Grind connection surfaces on new rear fender (1) in shaded areas down to bare metal with round wire brush.

Sand the spot weld flanges on both sides down to bare metal.

5 Coat insides of spot welding flange on new rear fender (1) with zinc dust paint.