220 589 08 23 00
Template
Template
220 589 07 23 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
P63.50-2047-09
1 Mark cutting line on C-pillar with the aid of the template (arrows) and cut in area A with body saw.
2 Grind connection surfaces for new part down to bare metal in areas B and C.
3 Grind both sides of spot welding flange down to bare metal. Coat insides of spot welding flanges with zinc dust paint.
P63.50-2048-09
4 Apply bead of MB body sealant to both foam parts
(areas D and E).
Remove and replace damaged foam parts (group 68).