Commercially available tools
Number | Designation | |
WH58.30-Z-1001-02A | Hole punching pliers, dia. 6 mm. | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
P63.50-2020-06
1 Punch or drill 6 mm dia. holes into rear fender (areas A-C ).
P63.50-2023-09
2 Grind connection surfaces down to bare metal in shaded areas.
3 Coat insides of spot weld flanges with zinc dust paint.