Commercially available tools
Number | Designation | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
P63.50-0337-06
1 Smooth-grind flange facings in the cross-hatched areas. Smooth-grind spot flanges on both sides. Paint the insides of the spot flanges with zinc-dust paint.
P63.50-0338-01
2 Punch holes in the rear fender (area A) with the 7 mm dia. punch pliers.