Commercially available tools
Number | Designation | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
P63.50-0383-09
1 Grind connection surfaces on new part down to bare metal (shaded areas).
2 Grind both sides of spot welding flanges down to bare metal.
3 Coat insides of spot welding flanges with zinc dust paint.
4 Apply bead of MB-body sealant to C-pillar on foam section.
If foam section is damaged, replacement is necessary.