ar6350p140003f

Preparing new rear fender

Type ar · topic 63.50 · version 0106 · 2006-07-26

Applies to: MODEL 210.0

Where it sits

Function group 3 Body › 63 Side wall › 63.50 Rear fenders — Series 210 (models 0**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 210 (models 0**)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.31 Rear fender — Series 210 (models 0**)

AR63.50-P-1400-03F

Preparing new rear fender

Commercially available tools

Number

Designation

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

Preparing new rear fender

P63.50-0246-09

1 Grind connection surfaces on new part down to bare metal (shaded areas).

2 Grind both sides of spot welding flanges down to bare metal. Coat insides of spot welding flanges with zinc dust paint.

3 Apply bead of MB body sealant to C-pillar on foam section.

If foam section is damaged, replacement is necessary.