ar6350p140003e

Preparing new rear fender

Type ar · topic 63.50 · version 0105 · 2006-07-26

Applies to: MODEL 202.01 /02 /033 /12 /13

Where it sits

Function group 3 Body › 63 Side wall › 63.50 Rear fenders — Series 202 (models 01*, 02*, 033, 12*, 13*)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 202 (models 01*, 02*, 033, 12*, 13*)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.31 Rear fender — Series 202 (models 01*, 02*, 033, 12*, 13*)

AR63.50-P-1400-03E

Preparing new rear fender

Parts ordering note

Part no.

Designation

Quantity

000 986 34 42

MB zinc dust paint

Workshop equipment

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

Preparing new rear fender
Preparing new rear fender
Preparing new rear fender

P63.50-0023-01

P63.50-0024-01

P63.50-0025-01

1 Grind connection surfaces for mounting new part down to bare metal (shaded areas).

2 Grind spot welding flanges down to bare metal on both sides.

3 Coat insides of spot welding flanges with zinc dust paint.

Preparing new rear fender
Preparing new rear fender
Preparing new rear fender

P63.50-0026-01

P63.50-0027-01

P63.50-0028-01

4 Punch 7 mm dia. holes in new part with hole punching pliers (areas A - C).