201 589 00 51 00
Spot weld miller
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
P63.50-2007-06
1 Expose welding areas.
2 Cut out spot welds in areas A-C.
P63.50-2011-06
3 Cut out spot welds in area D.
4 Separate welds in areas E-F
5 Cut out spot welds in area G.
P63.50-2013-01
P63.50-2014-01
P63.50-2015-01
6 Cut out spot welds in areas H-K.
7 Expose brazed seam in area L and solder
8 Remove deformed rear fender.