ar6330p105003src

Install and weld in outer side longitudinal member

Type ar · topic 63.30 · version 0100 · 2016-02-01

Applies to: Model 453.3/4

Where it sits

Function group 3 Body › 63 Side wall › 63.30 Outer longitudinal members — Series 453 (models 3**, 4**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.41 Carrier/wheel well — Series 453 (models 3**, 4**)

AR63.30-P-1050-03SRC

Install and weld in outer side longitudinal member

Model

453.3/4

Install and weld in outer side longitudinal member

P63.30-3079-09

Shown on model 453.4

1

Install outer side longitudinal member (1), fit.

2

Remove outer side longitudinal member (1).

3

Apply 2-component adhesive in crosshatched areas on body (area C).

Observe pretreatment of bonding surfaces. Observe manufacturer's specifications for drying and processing time of adhesive.

4

Install outer side longitudinal member (1), fit and fix in place.

5

Outer side longitudinal member (1) (areas D and E).

6

Outer side longitudinal member (1) (areas A and B).

Inert gas weld in intervals and allow welding area to cool down in between. Reduces heat distortion.