ar6330p105002src

Prepare outer side longitudinal member

Type ar · topic 63.30 · version 0100 · 2016-01-27

Applies to: Model 453.3/4

Where it sits

Function group 3 Body › 63 Side wall › 63.30 Outer longitudinal members — Series 453 (models 3**, 4**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.41 Carrier/wheel well — Series 453 (models 3**, 4**)

AR63.30-P-1050-02SRC

Prepare outer side longitudinal member

Model

453.3/4

Prepare outer side longitudinal member

P63.30-3078-09

Shown on model 453.4

1

Mark and cut separating points on outer side longitudinal member (1) (areas A and B).

Transfer separation points from vehicle.

2

Grind mating surfaces on outer side longitudinal member (1) down to bare metal in crosshatched areas.

Sand down spot weld flanges to bare metal on both sides.
Grind mating surfaces down to bare metal on inside (area C).

3

Remove grinding dust.

4

Coat insides of spot weld flanges with zinc dust paint.

Do not coat bonding surfaces with zinc dust paint (area C).
Otherwise adhesion problems may occur.