Spot weld cutter
201 589 00 51 00
Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
L61.25-0035-01
1 Cut out spot welds in area of rear wheel flange (5) (arrows).
L61.25-0028-01
2 Cut out spot welds in area of console (6) (arrows).
L61.25-0037-01
3 Cut out spot welds in area of corner pillar paneling (7) (arrows) .
L61.25-0038-01
Left side of vehicle only
4.1 Grind down welds on holder (4) (arrows).
L61.25-0039-01
5 Cut out spot welds from cargo space side in area of wheel flange (5) and wheelhouse (8) (arrows).
L61.25-0040-01
Only models 667.353, 668.353, 670.353
6.1 Cut out spot welds (arrow) and remove reinforcement (3).
L61.25-0041-01
Only models 667.353, 668.353, 670.353
7.1 Cut out spot welds (arrows) and detach pillar (9).
L61.25-0042-01
8 Cut out spot welds from cargo space side in area of cross member (10) (arrows).
L61.25-0043-01
9 Cut out spot welds from cargo space side in area of closing section (11) (arrow).
L61.25-0044-01
10 Carefully push pillar (9) in the direction of arrow into cargo space.
11 Remove longitudinal member (1).