Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
L61.25-0002-06
1 Punch holes (7, 8, 9 and 10) 6 mm in ends of longitudinal member.
2 Mark drilling points (11) with following dimensions:
Dimensions: a = 410 mm
b = 30 mm
3 Center marked drilling points (11)
4 Drill centered drilling points (11) with 6 mm.
L61.25-0003-06
5 Mark drilling points (12) on back of longitudinal member (1) with following dimensions:
Dimensions: c = 60 mm
d = 40 mm
6 Center marked drilling points (12).
7 Drill centered drilling points (12) with 6 mm.
8 Grind longitudinal member (1) to bare metal on both sides in region of all punched and drilled holes.
9 Grind longitudinal member (1) to bare metal in areas (13 and 14).
10 Coat bare metal areas with zinc dust paint.