ar6330d000401fa

Separate outer sliding door entrance

Type ar · topic 63.30 · version 0100 · 2013-11-13

Applies to: MODEL 909

Where it sits

Function group 3 Body › 63 Side wall › 63.30 Outer longitudinal members — Series 909

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.50 Entrance — Series 909

AR63.30-D-0004-01FA

Separate outer sliding door entrance

MODEL

909

Separate outer sliding door entrance

1

Expose spot welds on outer sliding door entry (1) and cut out (arrows).


2

Mark separation lines (A) on outer sliding door entrance (1) along sidewall paneling (2) and B-pillar (3).


3

Cut outer sliding door entrance (1) along marked separation lines (A).


Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.


4

Remove outer sliding door entrance (1).


5

Grind connecting points down flat.


Sand down spot weld flanges to bare metal on both sides.


6

Remove grinding dust.


7

Coat inside of spot welding flanges with zinc dust paint.

D63.30-0002-06