ar6320p110202src

Prepare A-pillar outer section for installation

Type ar · topic 63.20 · version 0100 · 2016-03-01

Applies to: Model 453.4

Where it sits

Function group 3 Body › 63 Side wall › 63.20 Pillars — Series 453 (models 4**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 453 (models 4**)

AR63.20-P-1102-02SRC

Prepare A-pillar outer section for installation

Model

453.4

Prepare A-pillar outer section for installation

P63.20-8865-09

1

Mark separating point on A-pillar outer section (2) and cut (area A).

Transfer separation point from vehicle.
Dimensions:
a = approx. 32 mm

2

Grind mating surfaces on A-pillar outer section (2) down flat in crosshatched areas.

Sand down spot weld flanges to bare metal on both sides.

3

Remove grinding dust.

4

Coat insides of spot weld flanges with zinc dust paint.

Prepare A-pillar outer section for installation

P63.20-8866-09

5

Grind mating surfaces on A-pillar paneling (1) and upper A-pillar outer section (3) down to bare metal in crosshatched areas.

Do not coat bonding surfaces with zinc dust paint (area B).
Otherwise adhesion problems may occur.

Sand down spot weld flanges to bare metal on both sides.

6

Remove grinding dust.

7

Coat insides of spot weld flanges with zinc dust paint.