AR63.20-L-2011-03VA | Install and weld in taillamp reinforcement | ||
| Measures for preventing damage to vehicles or components when performing electric welding work | All models |
Test and adjustment values, gap dimensions at hoods, doors and covers
Number | Designation | Model | |||
BE60.00-P-1011-01A | Gap dimension | Liftgate to taillamp unit | Dimension "G" | mm | 5.0 (0.5) |
Rear-end door to bumper | Dimension "I" | mm | 7.0 (0.5) | ||
Liftgate to liftgate | Dimension "L" | mm | 7.0 (0.5) | ||
Liftgate to rear spoiler | Dimension "M" | mm | 5.0 (0.5) | ||
Rear spoiler to roof | Dimension "T" | mm | 7.0 (0.5) | ||
See picture | - | ||||
414 589 04 23 00
Inspection and welding device
Inspection and welding device
414 589 03 23 00
L63.20-0052-06
1 Install taillamp reinforcement, fasten with clamps and pop rivets with locking thread and fit with aid of straightening element.
2 Rivet taillamp reinforcement in area A (use Polygrip aluminum/steel countersunk head rivet
4.010 mm).
3 Weld taillamp reinforcement with .
4 Weld taillamp reinforcement in area B with .
L63.20-0210-04
5 Adapt spherical bolts for taillamp mount with aid of template.
6 Weld in area of spherical bolt.
7 Clean all weld joints with wire brush.
For reasons of strength and cost, do not grind down all welds in the area which is not visible.
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work