Spot weld cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
1 Expose and cut out spot welds in area A.
When cutting out the spot welds in the corner paneling at the top, do not damage taillamp reinforcement
2 Remove upper corner paneling from taillamp reinforcement.
3 Drill and debur holes for rivet connections in area A.
Drill rivet holes when fitting taillamp reinforcement on vehicle.
4 Sand spot welding flanges to bare metal on both sides Coat insides of spot welding flanges with zinc dust paint.
5 Grind connection surfaces down to bare metal on one side only in area B.
L63.20-0047-03