AR63.20-D-9010-02D | Preparing corner cap for installation | ||
Danger! | Risk of poisoning after inhaling vapors or swallowing adhesive. Injury hazard in case of skin or eye contact with the adhesive | Wear protective respiratory masks, protective gloves and safety glasses. Pour adhesive only into suitable and appropriately marked containers. | |
Danger! | Risk of injury from slipping when clamping the blade in the multicutter and from glass splinters when cutting out cemented windows | Always interrupt air supply when inserting or removing blade. Wear protective gloves and eye protection. |
124 589 21 63 00
Cutting blade
Hand pressure gun
000 589 01 25 00
Commercially available tools
Workshop equipment
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1042-01A | Broom yellow Körapur 140 sealing adhesive; 310 ml | Kögel Fahrzeugwerke GmbH |
BR00.45-Z-1049-01A | Helmipur SH 100 sealing adhesive, white, 310 ml | Kögel Fahrzeugwerke GmbH |
BR00.45-Z-1034-04A | Körasol V WL cleaner, 1l | Kögel Fahrzeugwerke GmbH |
BR00.45-Z-1049-07A | Primer Körabond HG 81, 1l | Kögel Fahrzeugwerke GmbH |
D63.20-1119-06
1 Cut glue off of adjacent channels (1) and roof (2) with cutting blade.
Do not leave more than 0.2 mm of old glue.
2 Vacuum glue area with wet/dry vacuum cleaner.
3 Clean gluing area with Körasol V WL cleaner and apply Körabond HG 81 primer.
Observe drying time!
D63.20-1120-06
4 Apply sealant on corner cap (3) with hand gun.
Referenced documents
- as0000z001601a Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes
- as6700z000101a Risk of injury caused by slipping when inserting blade in the multicutter and byglass splinters when cutting out bonded windows