Shown on model 909.632 |
1 | Right inner B-pillar |
D63.20-1463-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
| Remove | ||
1 | Remove detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining on vehicle with spark protection blankets | ||
3 | Remove right B-pillar paneling | ||
4 | Separate right inner B-pillar (1) | ||
1K-zinc dust paint | |||
Spot weld milling cutter | |||
5 | Prepare right inner B-pillar (1) for installation | ||
1K-zinc dust paint | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
6 | Install right inner B-pillar (1) | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
7 | Clean welds and sheet metal flanges | ||
8 | Install right B-pillar paneling | ||
9 | Install all detachable body components in area to be repaired |
201 589 00 51 00
Spot weld milling cutter
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work
- ah6000n000101a General information on body repair
- ar6320d0001fa Remove/install right B-pillar paneling
- ar6320d000401fa Separating right inner B-pillar section
- ar6320d000402fa Preparing right inner B-pillar section for installation
- ar6320d000403fa Welding in right inner B-pillar section
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000701a The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts