AR63.10-W-0807-02A | Prepare side wall, longitudinal member and floor panel connection surfaces for installation |
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
W63.10-1044-09
1 Grind connection surfaces in areas A to F down to bare metal on one side.
W63.10-1047-06
2 Grind connection surfaces in areas G to L down to bare metal on both sides.
3 Grind connection surfaces in areas M to R down to bare metal on one side.
W63.10-1046-09
4 Grind connection surfaces in areas S to U down to bare metal on both sides.
5 Grind spot welding flange in shaded areas down to bare metal on both sides. Coat insides of spot weld flanges with zinc dust paint.
W63.10-1045-04
6 Grind connection surfaces in areas V and X down to bare metal on both sides.
7 Grind connection surface in area W down to bare metal on one side.
8 Grind spot welding flange down to bare metal in shaded area on both sides. Coat inside of spot welding flange with zinc dust paint.