ar6310s012604e
Make hole for end stop of magnetic door holder
Type ar · topic 63.10 · version 0100 · 2016-05-18
Applies to: Model 447.6/7 with code W54 (2-wing rear-end door, 270 degrees)
Where it sits
Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 447 (models 6**, 7**)
EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 447 (models 6**, 7**)
AR63.10-S-0126-04E
| Make hole for end stop of magnetic door holder
|
|
|
Model
| 447.6/7
|
|
| with code W54 (2-wing rear-end door, 270 degrees)
|
1
| Mark hole (area A) on side wall paneling (1).
|
|
| Transfer dimension for hole (area A) from undamaged side of vehicle.
|
2
| Drill hole (area A) in side wall paneling (1) with Ø 26 mm bit.
|
3
| Deburr hole (area ) on side wall paneling (1) on both sides.
|
