Spot weld cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.10-3051-06
1 Expose spot welds and cut out with spot weld cutter (areas A, B and C).
2 Remove reinforcement between B-pillar and wheelhouse.
3 Grind connection surfaces down to bare metal in shaded areas. Sand spot weld flanges to bare metal on both sides
4 Remove grinding and drilling chips with wet/dry vacuum cleaner.
5 Coat insides of spot welding flanges with zinc dust paint.