210 589 04 23 00
Set of check of welding gauges
Side portal frame
210 589 17 23 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1003-01A | Electrode miller | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1031-02A | C-clamp | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
P63.10-0546-06
1 Install side wall on C-pillar and fasten to side portal straightening set.
Ensure that spacer plate is installed (sheet metal thickness of rear fender).
2 Fasten remaining connection points with clamps.
3 Weld side wall to C-pillar in area
A - , as well as and .
P63.10-0551-06