Test values for gap dimensions on hoods, doors and lids
Number | Designation | Model | |||
BE60.00-P-1002-01E | Gap dimension | Front door to A-pillar | Dimension "B" | mm | 6.5 (+1) |
Front door to fender | Dimension "H" | mm | 3.5 (-0.5/+1) | ||
Front door to rear door | Dimension "I" | mm | 4 (-0.5/+1) | ||
Front door to roof | Dimension "C" | mm | 6.5 (+1) | ||
Rear door to C-pillar | Dimension "T" | mm | 6 (+1) | ||
Rear door to side piece, bottom | Dimension "J" | mm | 3.5 (+1) | ||
Front door to rear fender | Dimension "P" | mm | - | ||
See picture | |||||
BE60.00-P-1003-01E | Gap dimension | Trunk lid to rear fender, top | Dimension "F" | mm | - |
Trunk lid to taillamp | Dimension "M" | mm | - | ||
Rear fender to taillamp | Dimension "U" | mm | 2 (0.5) | ||
See picture | |||||
BE60.00-P-1004-01E | Gap dimension | Rear-end door to roof | Dimension "E" | mm | 6.5 (1) |
Rear-end door to rear fender | Dimension "M" | mm | 3.5 | ||
Rear-end door to taillamp | Dimension "L" | mm | 4 | ||
Rear-end door to bumper | Dimension "S" | mm | 5.5 | ||
Rear-end door to D-pillar | Dimension "Q" | mm | - | ||
See picture | |||||
BE60.00-P-1005-01E | Gap dimension | Fuel filler flap | Dimension "K" | mm | 3.5 (-0.5/+0.5) |
See picture | |||||
Feeler gauge
129 589 03 21 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1041-01A | Seam sealant, sprayable 310 ml | A 002 989 84 20 |
BR00.45-Z-1003-01A | Sealant, white, 310 ml, DB supply specification 6069.20 | A 001 989 63 20 |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.50-2361-06
1 Install outer rear wheel well with rear fender and fit using straightening tool and fix in place.
2 Install rear lamp, rubber seal and locking eye.
3 Check and adjust gaps.
Use feeler gauge!
P63.10-2678-09
4 Outer rear wheel well (areas C, G, I and J).
5 Outer rear wheel well (area H).
6 Outer rear wheel well on inner side of vehicle (areas E and F).
P63.10-2674-06
7 Outer rear wheel well (area D).
8 Outer rear wheel well (area B).