Test values for gap dimensions on hoods, doors and lids
Number | Designation | Model | |||
BE60.00-P-1002-01E | Gap dimension | Front door to A-pillar | Dimension "B" | mm | 6.5 (+1) |
Front door to fender | Dimension "H" | mm | 3.5 (–0.5/+1) | ||
Front door to rear door | Dimension "I" | mm | 4 (–0.5/+1) | ||
Front door to roof | Dimension "C" | mm | 6.5 (+1) | ||
Rear door to C-pillar | Dimension "T" | mm | - | ||
Rear door to side piece, bottom | Dimension "J" | mm | 3.5 (+1) | ||
Front door to rear fender | Dimension "P" | mm | - | ||
See picture | |||||
BE60.00-P-1003-01E | Gap dimension | Trunk lid to rear fender, top | Dimension "F" | mm | 3.5 (1) |
Trunk lid to taillamp | Dimension "M" | mm | 4 (1) | ||
Rear fender to taillamp | Dimension "U" | mm | - | ||
See picture | |||||
Feeler gauge
129 589 03 21 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1041-01A | Seam sealant, sprayable 310 ml | A 002 989 84 20 |
BR00.45-Z-1003-01A | Sealant, white, 310 ml, DB supply specification 6069.20 | A 001 989 63 20 |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.10-2393-09
1 Fit outer rear wheel arch panel and rear fender and fix in place.
2 Remove rear fender again.
3 (areas C - F and H).
4 (area B).
P63.10-2388-07
5 (area G).
6 Clean weld joints using wire brush.
7 Remove grinding and drill shavings using wet/dry vacuum cleaner.
8 Use corrosion prevention measures on outer rear wheel arch panel in C-pillar paneling area (arrow).