Commercially available tools
Number | Designation | |
WH58.30-Z-1001-35A | Aluminum workshop vehicle | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
P63.10-2307-09
1 Apply adhesive to mating surfaces on wheelhouse.
2 Position wheelhouse and insert manual temporary fasteners into every 4th hole.
3 Insert blind rivets as follows:
In area (A) Magnabulp steel/steel rivet 6.4x8 mm, from inside outward.
In area (B) Magnabulp steel/steel rivet 6.4x8 mm, from outside inward.
In area (C) Magnabulp steel/steel rivet 6.4x8 mm.
4 Instead of the weld seam, the mating surface is bonded and temporarily secured using clamping pliers.
5 Spread out escaping adhesive using brush.