ar6310p067006ka

Installing rear outer wheelhouse

Type ar · topic 63.10 · version 0101 · 2006-07-26

Applies to: MODEL 208.435 /444 /445 /447 /448 /465 /470

Where it sits

Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 208 (models 435, 444, 445, 447, 448, 465, 470)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.41 Carrier/wheel well — Series 208 (models 435, 444, 445, 447, 448, 465, 470)

AR63.10-P-0670-06KA

Installing rear outer wheelhouse

Commercially available tools

Number

Designation

WH58.30-Z-1003-02A

Clamping pliers

Workshop equipment

WE58.40-Z-1001-02A

Inert gas welder

WE58.40-Z-1002-02A

Spot welder

Installing rear outer wheelhouse

P63.10-2015-09

1 Fasten rear outer wheelhouse (1) on soft top compartment side section (2) and rear inner wheelhouse (3) with clamping pliers.

2 Weld rear outer wheelhouse (1) to soft top compartment side section (2) and to outer side longitudinal member (4) (areas A, B and arrow).

3 Weld rear outer wheelhouse (1) to outer side longitudinal member (4) (area D).

4 Weld rear outer wheelhouse (1) to rear inner wheelhouse (3) (area C).

5 Weld rear outer wheelhouse (1) to soft top compartment side section (2) and rear inner wheelhouse (3) (areas E and F).

Installing rear outer wheelhouse

P63.10-2020-12

6 Weld rear outer wheelhouse (1) to soft top compartment side section (2) and rear inner wheelhouse (3) (area G).

7 Weld rear outer wheelhouse (1) to end plate (5) of outer side longitudinal member (4) (area H).