ar6310p011001src
Prepare side wall paneling for installation
Type ar · topic 63.10 · version 0101 · 2017-03-31
Applies to: Model 453.4
Where it sits
Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 453 (models 4**)
EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 453 (models 4**)
EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.38 Left panel — Series 453 (models 4**)
EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.39 Right panel — Series 453 (models 4**)
AR63.10-P-0110-01SRC
| Prepare side wall paneling for installation
|
|
|
1
| Scribe separating point on side wall paneling (1) and cut (area A).
|
|
| Transfer separation point from vehicle.
|
2
| Drill holes for spot welding on side wall paneling (1) (area D).
|
3
| Grind mating surfaces down to bare metal on sidewall paneling (1) in crosshatched areas.
|
|
| Sand down spot weld flanges to bare metal on both sides.
Grind mating surface down to bare metal on inside (areas B and C).
|
5
| Coat insides of spot weld flanges with zinc dust paint.
|
|
| Do not coat bonding surfaces with zinc dust paint (areas B and C).
Otherwise adhesion problems may occur.
|
