Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1001-05A | Two-post lifting platform |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L63.10-0181-07
1 Expose and cut out spot welds in areas A through E.
2 Remove deformed inner section from side wall paneling.
3 Align mating surfaces and grind down to bare metal in cross-hatched areas. Grind spot weld flanges down to bare metal on both sides Coat insides of spot weld flanges with zinc dust paint.
4 Grind mating surfaces down to bare metal in areas E to H on both sides and coat insides with zinc dust paint (areas F to H riveted).
5 Grind mating surfaces down to bare metal in areas J and K on one side.