Commercially available tools
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1003-02A | Multifunction device |
D63.10-0045-05
1 Weld right side wall paneling bottom section (1) to sheet metal strips ( , arrows).
2 Weld right side wall paneling bottom section (1) to C-pillar (12) ( , arrows).
3 Weld right side wall paneling bottom section (1) to outer sliding door entry (4) ( , 13).
D63.10-0023-11
4 Weld right side wall paneling bottom section (1) to side wall paneling top section (19) and outer corner pillar paneling (5) ( , arrows).
D63.10-0038-11
To prevent the sheet metal parts from distorting, hold steel or copper block to side wall paneling from outside. The block (approx. 25 mm x 25 mm x 200 mm) should make full contact.
5 Weld right side wall paneling bottom section (1) to inner side wall section (10) ( or , arrows).
D63.10-1175-01
5 Weld right side wall paneling (1) to inner side wall section and wheelhouse
( , arrows).
D63.10-1176-01
6 Weld right side wall paneling (1) to rear inner side wall section and wheelhouse ( , arrows).
D63.10-1178-02
7 Weld right side wall paneling (1) to front and rear end section ( ).
D63.10-1179-02