ar6310d003102f

Prepare inside part of rear sidewall behind wheel arch for installation

Type ar · topic 63.10 · version 0100 · 2013-10-07

Applies to: MODEL 909.843 with CODE W03 (Body extension)

Where it sits

Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 909 (models 843)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 909 (models 843)

AR63.10-D-0031-02F

Prepare inside part of rear sidewall behind wheel arch for installation

MODEL

909.843

with CODE W03 (Body extension)

Prepare inside part of rear sidewall behind wheel arch for installation

D63.10-1731-09

The following operation steps are shown on the left side of the vehicle on MODEL 909.843 and must be performed analogously on the right side in the event of damage.

1

Scribe cuts on inner sidewall (1) and cut (areas A, B, C, D, E and F).

Transfer dimensions for cuts from body.

Prepare inside part of rear sidewall behind wheel arch for installation

2

Drill holes for plug welding on inner sidewall (1) (area G).


3

Grind inner sidewall (1) down to bare metal in crosshatched areas.


Sand down spot weld flanges to bare metal on both sides.


4

Remove grinding dust and drill chips.


5

Coat inside of spot welding flanges with zinc dust paint.

D63.10-1732-03