ar6310d002802f

Prepare rear sidewall paneling behind wheel arch up to bead for installation

Type ar · topic 63.10 · version 0100 · 2013-10-02

Applies to: MODEL 909.843 with CODE W03 (Body extension)

Where it sits

Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 909 (models 843)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 909 (models 843)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.38 Left panel — Series 909 (models 843)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.39 Right panel — Series 909 (models 843)

AR63.10-D-0028-02F

Prepare rear sidewall paneling behind wheel arch up to bead for installation

MODEL

909.843

with CODE W03 (Body extension)

Prepare rear sidewall paneling behind wheel arch up to bead for installation

D63.10-1707-08

The following operation steps are shown on the left side of the vehicle on MODEL 909.843 and must be performed analogously on the right side in the event of damage.

1

Scribe cut on rear side wall (1) and cut (area A).

Dimensions:
a = 35 mm

2

Grind rear side wall (1) down to bare metal on outside in cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

3

Coat inside of spot welding flanges with zinc dust paint.

Prepare rear sidewall paneling behind wheel arch up to bead for installation

4

Drill holes for plug welding on rear side wall (1) (areas B).


Transfer position of holes for body.


5

Remove grinding dust and drill chips.

D63.10-1711-11

Prepare rear sidewall paneling behind wheel arch up to bead for installation

6

Fabricate duplicator (2) of approx. 1.5 mm thick sheet steel.


Dimensions:
b = 400 mm
c = 60 mm


7

Grind duplicator (2) down to bare metal in crosshatched area.


8

Remove grinding dust.

D63.10-1708-03