201 589 00 51 00
Spot weld milling cutter
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1001-05A | Two-post lifting platform |
P62.30-0277-09
1 Cut out spot welds on reinforcement (17) (arrows).
3 Coat spot welding flange on wheelhouse paneling (21) with zinc dust paint.
2 Grind reinforcement connecting points (17) on longitudinal member (37) and wheelhouse paneling (21) down to bare metal (cross-hatched areas).