ar6130w0010a

Removing and installing splash guard

Type ar · topic 61.30 · version 0101 · 1998-01-05

Applies to: BODY 942.899 with CODE (F04) L cab (long)

Where it sits

Function group 3 Body › 61 Substructure › 61.30 Splash guard — Series 942 (models 899)

EinPAS 35 Body/frame/detachable parts › 35.25 Insulation/trim below/sealing/underbody protection › 35.25.41 Underfloor paneling/noise encapsulation/underbody protection — Series 942 (models 899)

AR61.30-W-0010A

Removing and installing splash guard

9.1.97

BODY 942.899 with CODE (F04) L cab (long)

Removing and installing splash guard

W61.30-0001-09

1 Hex. head bolt

2 Splash guard

3 Hex. head bolt

7 U-channel

4 Hex. head bolt

5 Plastic corner
6 Spreading anchor

Removal, installation

1

Tilt cab

Danger!

Injury hazard from pinching and crushing when cab is tilted

When tilting ensure that no one is present in the tilting area of the cab. Always tilt cab to end position and secure with safety brace.

AS60.80-Z-0001-01A

2

Remove splash guard (2)

3

Remove plastic corner (5)

Remove pins from spreading anchor (6)

Installation: Plastic corner (5) must engage in U-channel (7) in side paneling

4

Reinstall in opposite order

Referenced documents