1 | Fastening console |
2 | Fastening console |
P61.10-2283-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
General information on MB materials | |||
General information on repair of vehicles with ultra-strength steels. | |||
| Remove | ||
1 | Remove detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining on vehicle with spark protection blankets | ||
3 | Remove mounting consoles (1, 2) | ||
Commercially available devices/tools | |||
4 | Prepare mounting consoles (1, 2) for installation | ||
Commercially available devices/tools | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
5 | Install mounting consoles (1, 2) | ||
| 000 588 02 84 00 Welder | ||
Commercially available devices/tools | |||
6 | Clean weld joints and sheet metal flange with round wire brush | Commercially available devices/tools | |
7 | Remove spark protection blankets | ||
8 | Clean repair area | Commercially available devices/tools | |
9 | Prime repair area using primer filler | ||
Topical note | Notes on paintwork repairs | ||
Use only primer filler approved by Daimler AG: | |||
10 | Seal seam following repairs | ||
Supplement standard seals with sealant. | |||
11 | Paint repair areas and adjacent surfaces | ||
Topical note | Notes on paintwork repairs | ||
Use only paints approved by Daimler AG: | |||
12 | Add cavity preserving agent | ||
13 | Install all detachable body components in area to be repaired |
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work
- ah6000n000101a General information on body repair
- ah6000p002401n General information on repair of vehicles with ultra-strength steels.
- ah9800p940802mcc Notes on paintwork repairs
- ah9800p940903a General information on MB materials
- ar6110p002001src Remove mounting bracket for front cross strut
- ar6110p002002src Prepare mounting bracket for front cross strut for installation
- ar6110p002003src Install mounting bracket for front cross strut
- ar9710p4000sr Seam sealing following repair
- ar9720p1500sr Cavity preservation following repair work
- as0000z000701a The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- ws6000p0022k 000 588 02 84 00 Welder