W60.80-0053-01
1 Split pin
2 Washer
3 Hydraulic lines
4 Tilt cylinder
32 Bolts
33 Cover on passenger-side entrance
34 Hexagon bolt
35 Bolt on upper tilt cylinder mount
W60.80-0046-01
| Remove/install | ||
1 | Remove cover (33) from passenger side entrance | Only possible when folding door is closed. | |
2 | Unscrew bolt (34) and remove bolt (25) from upper tilt cylinder mount | ||
3 | Remove hydraulic lines (3) from tilt cylinder (4) | Mark connections on hydraulic lines. | |
4 | Remove cotter pin (1) from bottom tilt cylinder mount and remove window (2). | ||
5 | Remove tilting cylinder (4) | Installation: Observe installation position of plastic socket. The collar should point toward inside.Lubricate bottom tilt cylinder mount. | |
6 | Install in the reverse order | ||
7 | Fill hand pump of tilting device up to edge with hydraulic fluid | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
8 | To bleed tilting device, tilt cab forwards and back again | Screw plug on tilt mechanism must be open during bleeding. Collect excess hydraulic oil using suitable container. Open front flap and release steering wheel adjustment. | |
| Notes on tilting the cab | Model series 957 | |
9 | Check oil level in hand pump on tilt mechanism again, correct if necessary | Fill with hydraulic oil up to edge. | |
10 | Check telescopic ram connections for leaks |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |
Referenced documents
- ah6080n000301a Notes on tilting the cab
- as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted