ar6080g0010e

Tilt cab to repair position, tilt back

Type ar · topic 60.80 · version 0100 · 2007-11-08

Applies to: MODEL 405.050 with BODY 979.820

Where it sits

Function group 3 Body › 60 Body - general › 60.80 Cab, cab mounting — Series 405 (models 050) · Series 979 (models 820)

EinPAS 35 Body/frame/detachable parts › 35.50 Cab suspension system/-cab tilt system/-air suspension › 35.50.40 Cab mounting/cab tilt system — Series 405 (models 050) · Series 979 (models 820)

AR60.80-G-0010E

Tilt cab to repair position, tilt back

31.10.07

MODEL 405.050 with BODY 979.820

Tilt cab to repair position, tilt back

G60.80-3403-06

1 Release handle

2 Locking lever

3 Counter stay

4 Arresting element

5 Guide rod

Tilt

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

1

Expose electrical lines on cab rear panel

If present.

2

Pull release handle (1) (arrow A)

Remove loose objects from cab.

Notes on tilting the cab

Model 405, 408, 418, 427, 436.330, 437

AH60.80-N-0003-01B

3

Tilt cab to maintenance position

Push locking lever (2) upward until arresting element (4) is unhooked from guide rod (5) (arrow B). Then push cab upward until arresting element (4) arrests in lower cutout of guide rod (5).

4

Secure arresting element (4)

For this purpose push locking lever (2) down until counter stay (3) arrests.

Tilt back

5

Release arresting element (4)

Slightly push cab upward to relieve arresting element (4) and hold in this position. Then push locking lever (2) upward until arresting element (4) is unhooked from guide rod (arrow B).

6

Lower cab

When tilting back cab, pull down by hand so that the cab mount arrests.

Referenced documents