B31.10-0010-09
1 Cabin support rod
2 Hook
3 Nuts
4 Unlocking steel cable
5 Safety cable
6 Rubber cover
7 Locking pin
8 Opening
9 Cabin
| Remove and install | ||
Danger! | Risk of injury due to been caught or smashed by the tilting cabin | During the cabin tilting operation to and fro, do not go inside the area in which the cabin tilts and adopt preventive measures to prevent non-authorized people to go there. Always tilt the cabin up to its final position and lock it there with the safety device. | |
1 | Tilt the cabin | ||
2 | Support the cabin (9) with a chain hoist | Support the cabin in a safe and adequate way avoiding that it returns suddenly back. | |
3 | Remove the rubber covers (6) from the openings (8) | ||
4 | Put two locking pins (7) of the safety cable (5) in the openings (8) and lock them at the cabin plate | | |
5 | Couple the safety cable (5) to the chain hoist hook (2) | ||
6 | Disconnect the cabin unlocking steel cable (4) | ||
7 | Remove the nuts (3) | | |
8 | Remove the cabin support rod (1) | ||
9 | Install in reverse order |
Trailer coupling
Número | Denominação | Vehicles 979.013/016/046, with 979.811 cab | |||
BA31.10-B-1001-01A | Nuts fastening the cab support rod | M12x1.5 | Nm | 80 | |
970 589 00 31 00
Safety cable
Referenced documents
- ar6080b0010d Tilt cab to repair position, tilt back
- as6080b000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted