AR60.10-D-5010Q | Setting up straightening bench, straightening set for front end repairs | 2.8.95 |
MODEL 904.012 with CODE (G40) Automatic transmission
D60.10-0072-09
D60.10-0073-09
1 Support for front crossmember 7001.7001 (for MZ.260)
2 Support for front crossmember 7001.7002 (for MZ.260)
3 Base carrier 7001.7003 (for support 5 and 6 and centering pin V.29)
4 Base carrier 7001.7004 (for support 5 and 6 and centering pin V.29)
5 Support for securing floor panel 7001.7005 (for base carrier 3 and 4)
6 Support for securing floor panel 7001.7006 (for base carrier 3 and 4)
7 Support for front axle attachment to front longitudinal member 7001.7007 (for MZ.260)
8 Support for front axle attachment to front longitudinal member 7001.7008 (for MZ.260)
9 Support for suspension strut bracket 7001.7009 (for MZ.260)
10 Support for suspension strut bracket 7001.7010 (for MZ.260)
11 Checking and locating plate 7001.7011 (for support 9 and 10)
12 Support for front axle attachment to rear longitudinal member 7001.7012 (for MZ.260)
13 Support for front axle attachment to rear longitudinal member 7001.7013 (for MZ.260)
V.29 Centering pin for mounting front longitudinal member (for base carrier 3 and 4)
T.034 Centering pin (for support 40 and 41)
T.039 Centering pin (for support 7 and 8)
A1 Modular member 955.741
B1 Modular member 955.742
C Modular member 955.715/955.703
D Modular member 955.704
MZ.200 Bracket
MZ.260 Bracket
16 Support for rear engine mount support 7001.7016 (for MZ.200)
17 Support for rear engine mount support 7001.7017 (for MZ.200)
18 Support for front propeller shaft bearing bracket 7001.7018 (for MZ.260)
19 Support for rear propeller shaft bearing bracket 7001.7019 (for MZ.260)
26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
28 Supports 7001.7028 (for base carrier 26 and 27)
40 Support 7001.7040 (for mounting front longitudinal member, at rear engine support)
41 Support 7001.7041 (for mounting front longitudinal member, at rear engine support)
Fig. item, etc. | Work instructions | ||
A1, B1, C, D | Set up Celette straightening bench modular members | ||
Set up straightening bracket set for front end repairs | Always set up assembly with circled number of items | ||
11 | Checking and locating plate 7001.7011 (for support 9 and 10) | Use checking and locating plate accordingly when repairing or testing | |
16, 17 | Support with bracket MZ.200 | Lock supports in lower hole with brackets in upper hole | |
18 | Support with bracket MZ.260 | Lock support in lower hole with bracket in upper hole | |
19 | Support with bracket MZ.200 | Lock support in lower hole with bracket in lower hole | |
26, 27 | Base carrier | Tighten base carrier on the modular member in accordance with hole pattern D | |
28 | Supports for base carrier 26 and 27 | Screw supports to base carrier through holes b and d |
Workshop equipment
WE58.40-Z-1008-01B | Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter) |
WE58.40-Z-1009-01B | Body lifting jack |
Referenced documents
- ar6010d501001a Mount Celette straightening bench modular members
- ar6010d501002a Set up straightening bracket set for front end repairs
- ar6010d501003a Insert check and attachment plate