AR60.10-D-5010E | Setting up straightening bench, straightening set for front end repairs | 2.8.95 |
MODEL 901.062, 902.062/072, 903.062/072 with CODE (G40) Automatic transmission W4A028
D60.10-0048-09
D60.10-0049-09
1 Fixture 7001.7001 for front cross member (for MZ.260)
2 Fixture 7001.7002 for front cross member (for MZ.260)
3 Base support 7001.7003 (for fixtures 5 and 6 and centering pin V.29)
4 Base support 7001.7004 (for fixtures 5 and 6 and centering pin V.29)
5 Fixture 7001.7005 for locating floor panel (for base supports 3
and 4)
6 Fixture 7001.7006 for locating floor panel (for base supports 3, 4)
7 Fixture 7001.7007 for front attachment of front axle to longitudinal member (for MZ.260)
8 Fixture 7001.7008 for front attachment of front axle to longitudinal member (for MZ.260)
9 Fixture 7001.7009 for spring strut console (for MZ.260)
10 Fixture 7001.7010 for spring strut console (for MZ.260)
11 Check and locating plate 7001.7011 (for fixtures 9 and 10)
12 Fixture 7001.7012 for rear attachment of front axle to longitudinal member (for MZ.260)
41 Fixture 7001.7041 (for front longitudinal member support,
behind rear engine mount)
V.29 Centering pin for front longitudinal member support (for base supports
3 and 4)
T.034 Centering pin (for fixtures
40 and 41)
T.039 Centering pin (for fixtures 7 and 8)
A1 Modular member 955.741
B1 Modular member 955.742
C Modular member 955.715/955.703
D Modular member 955.704
MZ.200 Jack stand
MZ.260 Jack stand
13 Fixture 7001.7013 for rear attachment of front axle to longitudinal member (for MZ.260)
16 Fixture 7001.7016 for rear engine mount support (for MZ.200)
17 Fixture 7001.7017 for rear engine mount support (for MZ.200)
18 Fixture 7001.7018 for front propeller shaft bearing console (for MZ.260)
19 Fixture 7001.7019 for rear propeller shaft bearing console (for MZ.260)
26 Base support 7001.7026 for rear spring, front spring support console (with spring installed or removed,
all 2.5 - 4.6 t vehicles, except platform/crew cab 2.5 - 3.5 t)
27 Base support 7001.7027 for rear spring, front spring support console (with spring installed or removed,
all 2.5 - 4.6 t vehicles, except platform/crew cab 2.5 - 3.5 t)
28 Fixtures 7001.7028 (for base supports 26 and 27)
34 Reducing sleeves to 18 mm 7001.7034 (for fixtures 28,
for all 2.5 - 3.5 t vehicles)
40 Fixture 7001.7040 (for front longitudinal member support,
behind rear engine mount)
Item in figure, etc. | Working instructions | ||
A1, B1, C, D | Install Celette straightening bench modular members | ||
Install straightening set for front end repairs | Always install subassemblies with circled item number | ||
11 | Check and locating plate 7001.7011 | Install check and locating plate as required for repairs or test work | |
16, 17 | Fixture with jack stand MZ.200 | Align bottom hole of fixtures with top hole of jack stands and lock | |
18, 20, 21 | Fixture with jack stand MZ.260 | Align bottom hole of fixtures with top hole of jack stands and lock | |
19 | Fixture with jack stand MZ.200 | Align center hole of fixture with top hole of jack stand and lock | |
26, 27 | Base support | Screw base support to modular member according to hole pattern A | |
34 | Reducing sleeves to 18 mm | Insert in fixtures 28 |
Workshop equipment
WE58.40-Z-1008-01B | Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter) |
WE58.40-Z-1009-01B | Body lifting jack |
Referenced documents
- ar6010d501001a Mount Celette straightening bench modular members
- ar6010d501002a Set up straightening bracket set for front end repairs
- ar6010d501003a Insert check and attachment plate