ar6010d5010ab

Set up straightening bench, straightening set for front repair

Type ar · topic 60.10 · version 0108 · 2006-07-25

Applies to: MODELS 904.313 /323 with TRANSMISSION 711.603 MODELS 904.013 /413 /423 with TRANSMISSION 711.612 MODELS 904.013 /313 /323 with TRANSMISSION 711.612 with CODE (N05) Countershaft PTO (2c) without flange MODELS 904.013 /313 /323 with TRANSMISSION 711.612 with CODE (N07) PTO countershaft (2b) with flange

Where it sits

Function group 3 Body › 60 Body - general › 60.10 Straightening bench, straightening accessory — Series 904 (models 013, 313, 323, 413, 423)

EinPAS 35 Body/frame/detachable parts › 35.15 Measurements/straightening bench › 35.15.30 Straightening bench — Series 904 (models 013, 313, 323, 413, 423)

Also applies to engines/gearboxes: 711 603, 711 612

AR60.10-D-5010AB

Set up straightening bench, straightening set for front repair

3.8.95

MODELS 904.313 /323 with TRANSMISSION 711.603

MODELS 904.013 /413 /423 with TRANSMISSION 711.612

MODELS 904.013 /313 /323 with TRANSMISSION 711.612 with CODE (N05) Countershaft PTO (2c) without flange

MODELS 904.013 /313 /323 with TRANSMISSION 711.612 with CODE (N07) PTO countershaft (2b) with flange

Set up straightening bench, straightening set for front repair

D60.10-0093-09

Set up straightening bench, straightening set for front repair

D60.10-0087-09

1 Support for front cross member 7001.7001 (for MZ.260)

2 Support for front cross member 7001.7002 (for MZ.260)

3 Basic carrier 7001.7003 (for mounts 5 and 6 and centering pin V.29)

4 Base carrier 7001.7004 (for support 5 and 6 and centering pin V.29)

5 Support for securing floor panel 7001.7005 (for base carrier 3 and 4)

6 Mount for floor sheet attachment 7001.7006 (for basic carriers 3 and 4)

7 Support for front axle attachment to front longitudinal member 7001.7007 (for MZ.260)

8 Mount for front axle attachment to front longitudinal member 7001.7008 (for MZ.260)

9 Mount for suspension strut bracket 7001.7009 (for MZ.260) except all-wheel drive

7001.7043 (for MZ.260) all-wheel drive only

10 Mount for suspension strut bracket 7001.7010 (for MZ.260) except all-wheel drive

7001.7044 (for MZ.260) only all-wheel drive

27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)

28 Mounts 7001.7028 (for basic carriers 26 and 27)

29 Support for rear spring, rear spring bearing bracket 7001.7029 (for MZ.260, for all 4.6 t)

40 Mount 7001.7040 (for front longitudinal member base, at rear engine support)

41 Support 7001.7041 (for mounting front longitudinal member at rear engine support)

V.29 Centering pin for front longitudinal member (for basic carriers 3 and 4)

T.034 Centering pin (for fixtures 40 and 41)

T.039 Centering pin (for fixtures 7 and 8)

A1 Modular member 955.741

B1 Modular member 955.742

C Modular member 955.715/955.703

D Modular member 955.704

MZ.200 Support

MZ.260 Support

11 Checking and locating plate 7001.7011 (for support 9 and 10)

12 Support for front axle attachment to rear longitudinal member 7001.7012 (for MZ.260)

13 Mount for front axle attachment to rear longitudinal member 7001.7013 (for MZ.260)

14 Intermediate plate 7001.7014 (for mount 16 and 17 for MZ.200)

15 Intermediate plate 7001.7015 (for mounts 16 and 17 for MZ.200)

16 Support for rear engine mount support 7001.7016 (for MZ.200)

17 Mount for rear engine mount base 7001.7017 (for MZ.200)

18 Mount for front propeller shaft bearing console 7001.7018 (for MZ.260)

19 Support for rear propeller shaft bearing bracket 7001.7019 (for MZ.260)

26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)

Fig. item etc.

Work instructions

Notes on aligning and welding work on shock absorber strut mount

Models 903, 904 for all-wheel drive vehicles

AH60.00-N-0020-01A

Set up Celette straightening bench modular members

Modular members A1, B1, C, D

AR60.10-D-5010-01A

Set up straightening bracket set for front end repairs

Always set up assembly with circled number of items

AR60.10-D-5010-02A

9, 10

Mount for spring strut console

11

Checking and locating plate 7001.7011 (for support 9 and 10)

Install check and attachment plate when performing repair or check work.

AR60.10-D-5010-03A

16, 17

Support with bracket MZ.200

Lock supports in upper hole with brackets in upper hole

18

Mount with jack stand MZ.260

Lock mount in bottom hole with jack stand in upper hole

19

Support with bracket MZ.200

Lock support in upper hole with bracket in upper hole

20, 21

Mount with jack stand MZ.260

Lock supports in lower hole with brackets in upper hole

26, 27

Basic carrier

Tighten base carrier on the modular member in accordance with hole pattern E

Workshop equipment

WE58.40-Z-1008-01B

Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter)

WE58.40-Z-1009-01B

Body lifting jack

WE58.40-Z-1012-01B

Extended straightening bracket set 7001.309 for all-wheel Sprinter for straightening bracket set 7001.300

Referenced documents