S60.00-4553-09
Shown on model 447.813 |
1 | Insulation for front door | 3 | Side wall paneling insulation | 5 | Insulation for liftgate | ||
2 | Sliding door soundproofing | 4 | Inner rear wheel well soundproofing |
Danger ! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Danger ! | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Replace | |||
1 | Replace front door soundproofing (1) | ||
2 | Replace sliding door soundproofing (2) | ||
3 | Replace liftgate soundproofing (5) | ||
Rear doors are not equipped with soundproofing. | |||
4 | Replace insulation on floor | ||
| Notes on seam seal | ||
Seam sealant, sprayable 310 ml | |||
5 | Replace side wall paneling soundproofing (3) on right side of vehicle | ||
6 | Replace side wall paneling soundproofing (3) on left side of vehicle | ||
7 | Replace insulation on middle roof paneling | ||
8 | Replace inner rear wheel well soundproofing (4) |
Referenced documents
- ah9710p000202a Notes on seam seal
- ar6000s175001e Replace insulation on front door
- ar6000s175002e Replace insulation on sliding door
- ar6000s175005e Replace insulation on floor
- ar6000s175006e Replace insulation on right side wall paneling
- ar6000s175007e Replace insulation on left side wall paneling
- ar6000s175008e Replace insulation on middle roof paneling
- ar6000s175009e Replace soundproofing on inner rear wheel well
- ar6000s175010e Replace dampening on liftgate
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- as9700z000101a Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents